PoolWindow

Pool season · Texas

Victoria Pool Season: the Year on One Bar

Last updated: July 25, 2026 · dates · water temp

This is the one-page view of Victoria's pool year: both model windows, the estimated water-temperature curve, and today's live position on the season bar. The detailed checklists live on the opening and closing guides; this page is the calendar you check between them.

Resort pool at dusk in a hot, long-season climateVictoria, TX — 190 swim days a year
J F M A M J J A S O N D today (build date)

off-season opening window swim season closing window

Reading it takes ten seconds: 52 dots, one per week. Solid teal is Victoria's swim season; the hollow teal run before it (February 9 to March 2) is when to open; the hollow amber run after is when to close, with November 30 as the deadline; gray is the covered season. Today's marker shows where you stand in that cycle right now.

The Victoria pool calendar

February 16open by
November 30close by
19080°F+ days
85°Fwater peak

Opening — target February 16

Open by February 16 — a two-week head start on the March 2 crossing keeps startup chemistry small and beats the local service rush.

Full opening guide

Closing — deadline November 30

The window opens November 20 once water leaves the algae zone; the model deadline is November 30, a week ahead of the December 9 freeze normal.

Full closing guide

Where the water sits today

SEASONAL VIEW

Estimated unheated pool water temp (site model, ±5°F). The live estimate loads in your browser from Open-Meteo air temperatures; in a typical year Victoria water runs about 53°F at its winter floor and 85°F at its summer peak.

40 45 50 55 60 65 70 75 80 85 58 open 65 algae

Estimated water temperature by month

This is Victoria's typical-year water curve: the same EWMA model as the live widget, run on the 1991–2020 normals instead of this week's weather.

40°50°60°70°80°90°100°JanFebMarAprMayJunJulAugSepOctNovDec65° algae zone58° swimmable startopen Feb 16close Nov 3085°F peak53°F floor
Site-model seasonal water estimates for an unheated in-ground pool near Victoria Fire Dept #5 — ±5°F, see methodology.
JanFebMarAprMayJunJulAugSepOctNovDec
54°55°61°66°73°80°83°85°82°76°67°59°

Warmest water typically June–September (peaking near 85°F); heaters and covers shift any month up.

Every station tells its own story: compare this curve with Tyler's pool season and Waco's — neighboring normals stations can shift the windows by a week or more. The full ranking lives on the Texas season index.

Victoria pool season FAQ

When should I open my pool in Victoria, TX?

The site model recommends opening by February 16 — about two weeks before Victoria's 7-day mean temperature crosses 61°F, while the water is still too cold for algae. The step-by-step sequence is in the Victoria opening guide.

When should I close my pool in Victoria?

Winterize by November 30. The model holds the deadline a week ahead of Victoria's NOAA 50% first-freeze date, so the plumbing is protected before the first hard night. The full sequence is in the Victoria closing guide.

How long is the swim season in Victoria?

Victoria averages 190 days a year with normal highs of 80°F or better — about 20 days earlier than the Texas median. The Texas season index ranks all 68 covered cities by the same metric.

How warm does pool water get in Victoria?

An unheated pool near Victoria typically peaks around 85°F in high summer and bottoms out near 53°F in winter, spending roughly 4 months at or above the 78°F comfort line most swimmers prefer. The month-by-month curve above shows the whole cycle; the methodology page explains the ±5°F error bars.

Data: NOAA 1991–2020 climate normals via Victoria Fire Dept #5 (3.0 mi); live outlook by Open-Meteo. Attribution: sources · assumptions: methodology.