When to Close Your Pool in San Angelo, TX: Deadline, Window & Checklist

San Angelo closing dates at a glance

With 194 days of 80°F-plus highs, San Angelo is keep-it-open country for plenty of owners; the closing dates above matter most if you'd rather not maintain water you won't swim in.

The same model in water terms: San Angelo's estimated pool temperature runs about 66°F in mid-April, 81°F in mid-June, 85°F in mid-August, and 70°F in mid-October, peaking near 85°F. Those four checkpoints — not any calendar holiday — are what the windows above are protecting.

The 12-step San Angelo winterizing checklist

The order matters more than the date: balanced water first, verified-dry lines before anything else freezes-proofs, and the cover only after everything below it is done. Work the list inside the window above.

1. Balance the water a few days ahead

   Give the chemistry a head start — balance to label ranges several days out, while circulation can still mix corrections evenly. Closing-day dosing never distributes as well.

2. Deep-clean the pool

   Leave nothing organic behind: skim the surface, brush every wall and step, vacuum the floor slowly. What goes under the cover dirty comes out worse — winter only ever compounds what it's given.

3. Service the filter one last time

   Send the filter into winter clean: backwash the sand or DE, rinse and dry the cartridges indoors. Media stored dirty over winter hardens into a spring problem no backwash fixes.

4. Apply winter chemicals per label

   Run the winter kit through moving water: dose each product per its label with the pump on, give it a few hours to distribute, then start the shutdown. Chemistry added to still water stays where it lands.

5. Lower the water level

   Your cover's manual sets the number — commonly a few inches under the skimmer for solid covers, barely below normal for mesh. Stop there. The remaining water isn't laziness; it's ballast holding the shell in the ground.

6. Blow out the lines and plug returns

   Air through every line — skimmer, returns, cleaner — until each blows dry mist, plugging returns while the air still pushes. Nothing else on this list protects as much plumbing per minute.

7. Protect the skimmer

   Install a skimmer guard bottle (or a plug rated for your skimmer) so ice that forms there crushes the sacrificial piece instead of cracking the skimmer body.

8. Add pool antifreeze where blowouts fall short

   Any line you can't prove is dry gets pool-grade antifreeze at the label's rate per foot. Automotive antifreeze is toxic in this context — pool-rated only, always.

9. Drain the equipment

   Nothing on the pad should hold water overnight: pull the drain plugs from pump, filter, heater, and feeder, stash them all in the pump basket, and carry the portable pieces indoors.

10. Set the air pillow and cover

    Inflate the pillow to about two-thirds, center it, then bring the cover over and secure it per its design. Under ice, that soft dome is the difference between inward compression and outward wall pressure.

11. Winterize the water features

    Waterfalls, slides, and spillover spas hold water in places gravity won't clear — blow those lines separately and plug them, or they'll be the one crack you find in spring.

12. Stage the cover pump

    Solid covers need drainage all winter: set a cover pump or siphon before the first storm, not after. Standing water strains seams and invites a mid-winter emergency.

What to buy before the rush

Every item below sells out somewhere in Texas every November. Stocking the short list before the rush costs nothing extra and saves the mid-project store run — the chemicals guide explains what each category actually does.

• Cover pump

  Solid covers collect rain all winter; this is the drainage plan.

• Expansion plugs + skimmer guard

  Cheap rubber that stands between ice and your fittings.

• Pool antifreeze

  Pool-rated glycol for the lines air couldn't clear.

• Winter closing kit

  The under-the-cover chemistry, measured for your gallons.

• Air pillow

  Gives ice somewhere to push besides your pool walls.

• Winter cover

  Sized to overlap; the cheapest insurance the pool wears all winter.

How San Angelo compares locally

San Angelo closes in the earlier half of Texas's calendar. Neighbors run close: Abilene (81 mi away) models its deadline at November 3 (the same day vs San Angelo's November 3), while Midland (106 mi) shows November 2. The spring mirror of this page is the San Angelo opening guide, and the season overview draws both windows on a single bar.

Local means local: San Angelo's dates come from San Angelo, the nearest station with complete daily temperature normals — 5.5 miles southwest, about 1890 feet up. Between that station and a Tom Green County backyard there's always a degree or two of microclimate; the windows are built wide enough to carry it.

Field notes for San Angelo owners

Blowout first, antifreeze second

Air is the only guaranteed freeze protection: a line that's verifiably dry cannot burst. Antifreeze (pool-grade, per label) is the fallback for lines you can't confirm — long runs, low spots, water-feature plumbing. Doing antifreeze instead of a blowout, rather than in addition, is how most cracked returns happen.

The mesh-cover spring surprise, prevented in fall

Mesh-covered pools green up early because late-winter sun plus nutrient-carrying meltwater reaches the water. The fall counter-moves: close late and cold, dose the winter kit exactly per label, and plan an early-spring peek under the cover rather than a Memorial Day reveal.

The skimmer is the most breakable part you own

Skimmer bodies crack because water freezes inside the throat with nowhere to push. A sacrificial bottle or spring-loaded guard absorbs that expansion for a few dollars. It's the highest-return item in the entire closing kit relative to what it protects.

Don't close a pool people are still using

With San Angelo's long season, the question isn't "is it November?" but "has the water actually cooled?" The window running to November 3 exists because warm-water closings breed spring algae. If swimmers keep showing up through November, let them — patience here is free maintenance.